AXMINISTER 7X10
SPECIFICATIONS
| Construction | A genuine Woven Axminster |
| Pile Content | 80% Wool, 20% nylon |
| Yarn Count | R740/2 |
| Pitch | 7/inch (27.56/dm) |
| Rows/inch(Rows/Dm) | 10/inch (39.37/dm) |
| Tufted Density | 70/inch² (1085/dm²) |
| Total Pile Weight | 1540g/m² (45.4oz/yd²) |
| Pile Height Above Backing | 7mm |
| Total Carpet Thickness | 11mm |
| Total Carpet Weight | 2600g/m² |
| Backing Materials | Juteweft, 80% polyester / 20% cotton warp |
| Backing Finish | Environment friendly SBR latex, fray resistance compound |
Performance and Test Results
| a. Critical radiation flux (ASTME648) | class 1 |
| b. Tuft bind (WNZ TM 202) | > 10N |
| c. Insect resistance (WNZTM 27) | class 5 |
| d. Color fastness against light (ISO 4892-2:1994) | > Class 4 |
| e. Electric propensity (AATCC134) | < 3.5KV |
| f. Thickness loss under static loading (WNZTM124A) | Minimum 80% thickness recovery after 24 hours removal of load |
| g. Thickness loss under dynamic loading | 1000 impacts (GB/T14252-93) average rate of loss < 15%loss <15% |
| h. Hexapod appearance change after 12000 revolutions (WNZTM 247/251/284) | Min 3 |
| i. Immersion in hot water | Pass |
| j. Durability and fiber integrity (WNZTM283) | Average rate of loss of 30mg/1000cycles |
| k. Hot metal nut test (BS4790) | Pass |
| l. Methanamine table test (BS6307) | Pass |
| m. Smoke emission (ASTME 662) | Pass |
| n. Fire load density | 68.7 (MJ/M²) |
| o. Environmental | Pass the test of CRI indoor air quality program |
SPECIFICATIONS
| Construction | A genuine Woven Axminster |
| Pile Content | 80% Wool, 20% nylon |
| Yarn Count | R740/2 |
| Pitch | 7/inch (27.56/dm) |
| Rows/inch(Rows/Dm) | 10/inch (39.37/dm) |
| Tufted Density | 70/inch² (1085/dm²) |
| Total Pile Weight | 1540g/m² (45.4oz/yd²) |
| Pile Height Above Backing | 7mm |
| Total Carpet Thickness | 11mm |
| Total Carpet Weight | 2600g/m² |
| Backing Materials | Juteweft, 80% polyester / 20% cotton warp |
| Backing Finish | Environment friendly SBR latex, fray resistance compound |
Performance and Test Results
| a. Critical radiation flux (ASTME648) | class 1 |
| b. Tuft bind (WNZ TM 202) | > 10N |
| c. Insect resistance (WNZTM 27) | class 5 |
| d. Color fastness against light (ISO 4892-2:1994) | > Class 4 |
| e. Electric propensity (AATCC134) | < 3.5KV |
| f. Thickness loss under static loading (WNZTM124A) | Minimum 80% thickness recovery after 24 hours removal of load |
| g. Thickness loss under dynamic loading | 1000 impacts (GB/T14252-93) average rate of loss < 15%loss <15% |
| h. Hexapod appearance change after 12000 revolutions (WNZTM 247/251/284) | Min 3 |
| i. Immersion in hot water | Pass |
| j. Durability and fiber integrity (WNZTM283) | Average rate of loss of 30mg/1000cycles |
| k. Hot metal nut test (BS4790) | Pass |
| l. Methanamine table test (BS6307) | Pass |
| m. Smoke emission (ASTME 662) | Pass |
| n. Fire load density | 68.7 (MJ/M²) |
| o. Environmental | Pass the test of CRI indoor air quality program |
